OFC2023 | 赛勒科技将在展会上隆重发布其800G硅光芯片及光引擎产品
发布时间：2023-03-02 09:28:02 热度：1401
3/02/2023，光纤在线讯，南通赛勒光电科技有限公司（简称“赛勒科技“），今日宣布其针对数据中心与通信市场研发的新产品—800G硅光引擎，将在2023年度美国光通信大会 (OFC, 3/7-9) 与合作伙伴索尔思光电以800G高速光模块形式进行动态联展，合作伙伴索尔思展位号3029。
Shanghai, March.02, 2023 – SiLUX Technologies Inc. (“SiLUX”), the designer and developer of silicon Photonic Integrated Circuits (PICs) and optical engine for the data center and telecommunication markets, today announced that it will conduct a live demonstration of its 800G optical engine together with its partner Source Photonics Inc. (“Source”) in QSFP-DD800 form factor. The live demonstration will take place at booth #3029 during the upcoming OFC’23 Conference in San Diego, CA from March 7 – 9, 2023.
The 800G optical transceiver module owned by Source Photonics is integrated with SiLUX's novel high performance silicon photonics (SiPho) optical engine, which incorporates SilUX’s Silicon Photonic Modulator PIC with a small size of 6.5mmx5.25mm and two continuous wave (CW) lasers that each supports four lanes. The 800G Sipho Modulator PIC monolithically integrates multiple modulators, splitters, waveguides and coupling structures, and enables high-speed modulation of light operating at 100Gb/s PAM4 signaling for data transmission.
The demonstrated 800G DR8 Sipho transceivers are designed to work seamlessly with Source Photonics’ industrial leading CW laser chips. It exceeds the optical interface specifications of IEEE P802.3df D2.0 for 800GBASE-DR8. It supports links over 500m and 2km for fiber breakout into 100GBASE-DR1 and 100GBASE-FR1. It leverages the state of the art 5nm DSP silicon and is packaged into type 2 QSFP-DD800 form-factor with dual MPO-12 connectors.
“We are happy to team up with SiLUX for this critical live demonstration, which represents a key milestone for each company,” said Dr. Frank Chang, Chief Engineer and CTO of Source Photonics Inc. “Future 800G optical transceivers reply on silicon photonics to address the increasing need for high capacity density and energy efficiency at lower cost. Together with our partners in the industry, we are thrived to bring high reliability and compelling cost per bit solution to our customers worldwide. The fully integrated PICs designed by SiLUX will result in lower cost and the ability to rapidly scale production. With these advantages, SiPho technologies will remain a very competitive choice for 800G application and the potential in 1.6T and beyond, and will continuously catch the attention of leading systems companies and hyperscale data centers all over the world.”
About Silux Technologies Co., Ltd.
Silux Technologies Co., Ltd. (SiLUX) is a Chinese company located in Shanghai, China. SiLUX is focusing on silicon-photonics-based technologies, providing a wide variety of PICs (photonic integrated circuits) for the data center and tele-communication markets. SiLUX also offers optical engines/solutions to customers with leading edge technologies both on chip’s performance and ease of packaging. The solutions will enable customer to develop silicon photonics-based products quickly and easily improving time to market and component costs. At SiLUX, we are committed to consistently striving to helping our customers achieve high speed, high quality and cost-effective network solutions with innovative silicon photonics technologies. More information is available at www.siluxtek.com.
About Source Photonics Inc.
As a leading global provider of innovative and reliable technology solutions for communications and data connectivity, we add value to our customers by developing next-generation solutions that enable their growth by meeting the rapidly increasing demands of cloud infrastructure, wireless communications, routing, and fiber-to-the-premises applications worldwide. Through lean management, manufacturing, and our Source Lean Quality (SLQ) system, we run our world-class operation at maximum efficiency, identifying and eliminating waste in our processes to create more value for our customers. Our technical expertise in R&D runs deep with manufacturing process development expertise and highly specialized engineering teams based around the globe — experts in optoelectronic devices, optical subassembly, and module design. Source Photonics is headquartered in West Hills, CA and has key R&D and manufacturing facilities in California, Taiwan, Shanghai, Chengdu, and Jintan, China. More information may be obtained at www.sourcephotonics.com.
This news release contains “forward-looking information” (within the meaning of applicable China securities laws) and “forward-looking statements” (within the meaning of the U.S. Private Securities Litigation Reform Act of 1995). Such statements or information are identified with words such as “anticipate”, “believe”, “expect”, “plan”, “intend”, “potential”, “estimate”, “propose”, “project”, “outlook”, “foresee” or similar words suggesting future outcomes or statements regarding any potential outcome. Such statements include the Company’s expectations with respect to the success of the Company’s product development efforts, the performance of its products, the expected results of its operations, meeting revenue targets, and the expectation of continued success in the financing efforts, the capability, functionality, performance and cost of the Company’s technology as well as the market acceptance, inclusion and timing of the Company’s technology in current and future products.
Such forward-looking information or statements are based on a number of risks, uncertainties and assumptions which may cause actual results or other expectations to differ materially from those anticipated and which may prove to be incorrect. Assumptions have been made regarding, among other things, management’s expectations regarding the success and timing for completion of its development efforts, financing activities, future growth, recruitment of personnel, opening of offices, the form and potential of its joint venture, plans for and completion of projects by the Company’s third-party consultants, contractors and partners, availability of capital, and the necessity to incur capital and other expenditures. Actual results could differ materially due to a number of factors, including, without limitation, the failure of its products to meet performance requirements, lack of sales in its products, once released, operational risks in the completion of the Company’s anticipated projects, lack of performance of its joint venture, delays in recruitment for its newly opened operations or changes in plans with respect to the development of the Company’s anticipated projects by third-parties, risks affecting the Company’s ability to execute projects, the ability of the Company to generate sales for its products, the ability to attract key personnel, and the ability to raise additional capital. Although the Company believes that the expectations reflected in the forward-looking information or statements are reasonable, prospective investors in the Company’s securities should not place undue reliance on forward-looking statements because the Company can provide no assurance that such expectations will prove to be correct. Forward-looking information and statements contained in this news release are as of the date of this news release and the Company assumes no obligation to update or revise this forward-looking information and statements except as required by law.
Shanghai, March.02, 2023 – SiLUX Technologies Inc. (“SiLUX”), the designer and developer of silicon Photonic Integrated Circuits (PICs) and optical engine for the data center and telecommunication markets, today announced that it will conduct a live demonstration of its 800G optical engine together with its partner Source Photonics Inc. (“Source”) in QSFP-DD800 form factor. The live demonstration will take place at booth #3029 during the upcoming OFC’23 Conference in San Diego, CA from March 7 – 9, 2023.
The 800G optical transceiver module owned by Source Photonics is integrated with SiLUX's novel high performance silicon photonics (SiPho) optical engine, which incorporates SilUX’s Silicon Photonic Modulator PIC with a small size of 6.5mmx5.25mm and two continuous wave (CW) lasers that each supports four lanes. The 800G Sipho Modulator PIC monolithically integrates multiple modulators, splitters, waveguides and coupling structures, and enables high-speed modulation of light operating at 100Gb/s PAM4 signaling for data transmission.
The demonstrated 800G DR8 Sipho transceivers are designed to work seamlessly with Source Photonics’ industrial leading CW laser chips. It exceeds the optical interface specifications of IEEE P802.3df D2.0 for 800GBASE-DR8. It supports links over 500m and 2km for fiber breakout into 100GBASE-DR1 and 100GBASE-FR1. It leverages the state of the art 5nm DSP silicon and is packaged into type 2 QSFP-DD800 form-factor with dual MPO-12 connectors.
“We are happy to team up with SiLUX for this critical live demonstration, which represents a key milestone for each company,” said Dr. Frank Chang, Chief Engineer and CTO of Source Photonics Inc. “Future 800G optical transceivers reply on silicon photonics to address the increasing need for high capacity density and energy efficiency at lower cost. Together with our partners in the industry, we are thrived to bring high reliability and compelling cost per bit solution to our customers worldwide. The fully integrated PICs designed by SiLUX will result in lower cost and the ability to rapidly scale production. With these advantages, SiPho technologies will remain a very competitive choice for 800G application and the potential in 1.6T and beyond, and will continuously catch the attention of leading systems companies and hyperscale data centers all over the world.”
About Silux Technologies Co., Ltd.
Silux Technologies Co., Ltd. (SiLUX) is a Chinese company located in Shanghai, China. SiLUX is focusing on silicon-photonics-based technologies, providing a wide variety of PICs (photonic integrated circuits) for the data center and tele-communication markets. SiLUX also offers optical engines/solutions to customers with leading edge technologies both on chip’s performance and ease of packaging. The solutions will enable customer to develop silicon photonics-based products quickly and easily improving time to market and component costs. At SiLUX, we are committed to consistently striving to helping our customers achieve high speed, high quality and cost-effective network solutions with innovative silicon photonics technologies. More information is available at www.siluxtek.com.
About Source Photonics Inc.
As a leading global provider of innovative and reliable technology solutions for communications and data connectivity, we add value to our customers by developing next-generation solutions that enable their growth by meeting the rapidly increasing demands of cloud infrastructure, wireless communications, routing, and fiber-to-the-premises applications worldwide. Through lean management, manufacturing, and our Source Lean Quality (SLQ) system, we run our world-class operation at maximum efficiency, identifying and eliminating waste in our processes to create more value for our customers. Our technical expertise in R&D runs deep with manufacturing process development expertise and highly specialized engineering teams based around the globe — experts in optoelectronic devices, optical subassembly, and module design. Source Photonics is headquartered in West Hills, CA and has key R&D and manufacturing facilities in California, Taiwan, Shanghai, Chengdu, and Jintan, China. More information may be obtained at www.sourcephotonics.com.
This news release contains “forward-looking information” (within the meaning of applicable China securities laws) and “forward-looking statements” (within the meaning of the U.S. Private Securities Litigation Reform Act of 1995). Such statements or information are identified with words such as “anticipate”, “believe”, “expect”, “plan”, “intend”, “potential”, “estimate”, “propose”, “project”, “outlook”, “foresee” or similar words suggesting future outcomes or statements regarding any potential outcome. Such statements include the Company’s expectations with respect to the success of the Company’s product development efforts, the performance of its products, the expected results of its operations, meeting revenue targets, and the expectation of continued success in the financing efforts, the capability, functionality, performance and cost of the Company’s technology as well as the market acceptance, inclusion and timing of the Company’s technology in current and future products.
Such forward-looking information or statements are based on a number of risks, uncertainties and assumptions which may cause actual results or other expectations to differ materially from those anticipated and which may prove to be incorrect. Assumptions have been made regarding, among other things, management’s expectations regarding the success and timing for completion of its development efforts, financing activities, future growth, recruitment of personnel, opening of offices, the form and potential of its joint venture, plans for and completion of projects by the Company’s third-party consultants, contractors and partners, availability of capital, and the necessity to incur capital and other expenditures. Actual results could differ materially due to a number of factors, including, without limitation, the failure of its products to meet performance requirements, lack of sales in its products, once released, operational risks in the completion of the Company’s anticipated projects, lack of performance of its joint venture, delays in recruitment for its newly opened operations or changes in plans with respect to the development of the Company’s anticipated projects by third-parties, risks affecting the Company’s ability to execute projects, the ability of the Company to generate sales for its products, the ability to attract key personnel, and the ability to raise additional capital. Although the Company believes that the expectations reflected in the forward-looking information or statements are reasonable, prospective investors in the Company’s securities should not place undue reliance on forward-looking statements because the Company can provide no assurance that such expectations will prove to be correct. Forward-looking information and statements contained in this news release are as of the date of this news release and the Company assumes no obligation to update or revise this forward-looking information and statements except as required by law.
